- 안전성 강화를 위한 DNA 기반 신재생에너지 예지진단 관리기술 개발
- RE100 이행을 위한 표준화 모델(기술) 개발 및 이행수단 고도화
- 수로적합 투광형 양면모듈을 적용한 아치형 루프탑 태양광모듈 시스템 개발
- AI 기술을 적용한 태양광발전시스템의 O&M 솔루션 개발
- 태양광설치단가와 LCOE 경쟁력 강화를 위한 700W+ 고출력 모듈 대응 지능형 인버터 개발 및 장기실증
- 태양광 고장 및 예지진단기술개발

- Analysis of electrical and thermal characteristics of PV array under mismatching conditions caused by partial shading and short circuit failure of bypass diodes, Energy, 2021
- Power Generation Prediction of Building-Integrated Photovoltaic System with Colored Modules Using Machine Learning, energies, 2022
- Current Flow Analysis of PV Arrays under Voltage Mismatch Conditions and an Inverter Failure, energies, 2019

- Development of zinc-polyiodide flow battery with high energy density
- Development of MVR evaporation system for waste water treatment from desulfurization of power plant.
- High efficiency floe-electrode development for investigation of new process based on electrochemistry
- Performance analysis of Salinity Gradient Power(SGP) generation based on FCDI Technology.
- Development of seeding technology for the convergence system of on/off-shore renewable energy

- Performance of single- and double-effect operable mechanical vapor recompression desalination system adaptable to variable wind energy, Int. J. or Energy Research, 2019
-Flow-electrode capacitive deionization with highly enhanced salt removal performance utilizing high-aspect ratio functionalized carbon nanotubes, Water Research, 2019
- Study on the electrochemical characteristics of porous ceramic spacers in a capacitive deionization cell using slurry electrodes, J. of Electroanalytical Chemistry, 2019
- Membrane-spacer assembly for flow-electrode capacitive deionization, Applied Surface Science, 2018
- Heat and mass transfer of binary distillation in a vertical wetted-wall column, Chemical Engineering Research & Design, 2017
- Analysis of the desalting performance of flow--Electrode capacitive deionization under short-circuited closed cycle operation, Desalination, 2017
- Electrochemical analysis of slurry electrodes for flow-electrode capacitive deionization, J. of Electroanalytical Chemistry, 2017
- Plate-shaped graphite for improved performance of flow-electrode capacitive deionization, J. of the Electrochemical Society, 2017
- Electrochemical characterization of electrolyte-filled porous carbon materials for electrosorption process, J. of Electroanalytical Chemistry, 2017
- A novel three-dimensional desalination system utilizing honeycomb-shaped lattice structures for flow-electrode capacitive deionization, Energy & Environmental Science, 2017
- A study on the development of MVR desalination plant and its performance analysis, 에너지공학, 2016
- Stack design and operation for scaling up the capacity of flow-electrode capacitive deionization technology, ACS Sustainable Chemistry & Engineering, 2016
- Surface-modified spherical activated carbon for high carbon loading and its desalting performance in flow-electrode capacitive deionization, RSC Advances, 2016
- Flow-electrode capacitive deionization using an aqueous electrolyte with a high salt concentration, Environmental Science & Technology, 2016
- Desalination via a new membrane capacitive deionization process utilizing flow-electrodes, Energy & Environmental Science, 2013

- Development and demonstration of smart design platform technology for industrial dryers
- Development of a hybrid dryer for high-value fine chemical production
- Development of high-performance microwave furnace system for dielectrics as susceptors
- Development of regeneration system using dielectric ceramic filters for fine dust reduction

- Analysis of the electroviscous effects on pressure-driven flow in nanochannels using effective ionic concentrations
- Experimental study on heat transfer performance of a two-phase single thermosyphon using HFE-7100
- Drying characteristics of fine powders in an inert medium circulating fluidized bed with binary inert media
- Numerical analysis of bubble motion under a pressure pulsing condition
- Numerical analysis of convective drying of a moist object with combined internal and external heat and masstransfer
- Numerical analysis of convective drying of a moving moist object

- Development of neuromorphic technology for autonomous EMS
- A project to link the existing KIER building energy management platform for energy management in the 3rd Research Building
- Novel building cooling system using natural cold energy for reduction in power consumption
- Development of electrification technology for building heat source system to achieve carbon neutrality
- Development of low-carbon and highly energy efficient construction technologies
- Power-free electrostatic collecting device development for purifying indoor air pollution
- Development of energy performance diagnostic platform for existing buildings
- Convergence and empirical study of zero energy building element technology package
- ESS-based, small scale co-residential clean energy, smart home empirical study

- In Situ Airtightness Measurement Using Compressed Air Flow Characteristics, 2023.10.
- Proposed existing building diagnosis framework for energy efficiency improvement, 2023.09.
- Appropriate level of development of in-situ building information modeling for existing building energy modeling implementation, 2023.06.
- Energy-efficient PM adhesion method using functional electroactive nanofibers, 2022.11.
- Data-driven approach to predicting the energy performance of residential buildings using minimal input data, 2022.04.
- Experimental analysis of low-cost energy retrofit strategies for residential buildings to overcome energy poverty, 2022.02.
- In Situ measurement of the heat loss coefficient of thermal bridges in a building envelop, 2022.02.
- In Situ Evaluation of the U-Value of aWindow Using the Infrared Method, 2021.03.
- Deep Neural Network Approach for Prediction of Heating Energy Consumption in Old Houses, 2020.12.
- Statistical Methodology for the Definition of Standard Model for Energy Analysis of Residential Buildings in Korea, 2020.11.
- Scenario Analysis for GHG Emission Reduction Potential of the Building Sector for New City in South Korea, 2020.10
- Power-free electrostatic collecting film development for purifying indoor air pollution, 2019.08.
- The Feasibility of Improving the Accuracy of In Situ Measurements in the Air-Surface Temperature Ratio Method, 2018.07.
- Thermal performance evaluation of low-income buildings based on indoor temperature performance, 2018.04.
- Reliability Field Test of the Air-Surface Temperature Ratio Method for In Situ Measurement of U-Values, 2018.03.
- Energy benefits from semi-transparent BIPV window and daylight-dimming systems for IECC code-compliance residential buildings in hot and humid climates, 2017.06
- A middleware platform for the validation and utilization ofshort-term weather forecast data for office buildings, 2017.05.

- Process development of dry thick electrode for carbon-neutralized high-energy LIB (NST, Chief PI, 2021~2026, \11.4B)
- Next-generation battery prototyping center for SSB, LMB, and Li-S chemistries (KIAT, Chief PI, 2022~2025, \34.1B)
- Structural design and fabrication process development for solid-state batteries

- “Coupling structural evolution and oxygen-redox electrochemistry in layered transition metal oxides” Nature Materials, 2022, 758-766
- “Universal chemomechanical design rules for solid-ion conductors to prevent dendrite formation in lithium metal batteries” Nature Materials, 2020, 19, 758-766
- “Dissolution and ionization of sodium superoxide in sodium-oxygen batteries” Nature Communications, 2016, 7, 10760,
- “Rational design of redox mediators for advanced Li？O2 batteries” Nature Energy, 2016, 1, 16066
- “Sodium？oxygen batteries with alkyl-carbonate and ether based electrolytes” Physical Chemistry Chemical Physics, 2013, 15 (10), 3623-3629

● Development and improvement of field application technique to improve of air environment of school
● Development of performance improvement technology for living-friendly apartment housing - Numerical model for predicting the performance of the VOC absorption materials
● Reliability and building energy performance evaluation of MbAC Algorithm for the housing

● Metabolic rate estimation method using image deep learning
● Field study on the improvement of indoor air quality with toluene adsorption finishing materials in an urban residential apartment
● Filtration efficiency and ventilation performance of window screen filters
● Development of a Ventilation System Using Window Cavity
● Effect of Bypass Control and Room Control Modes on Fan Energy Savings in a Heat Recovery Ventilation System
● Assessment of a Real-Time Prediction Method for High Clothing Thermal Insulation Using a Thermoregulation Model and an Infrared Camera

(1) 대용량 재생에너지 저장을 위한 700 Wh/L급 초고성능 해수이차전지 원천기술 개발연구 (기본사업)
(2) 확장형 전기화학적 해수온도차발전 원천기술개발 및 적용성 분석을 위한 선행연구
(3) 철강산업 탄소중립전환 촉진을 위한 물-에너지-폐자원 넥서스 융합클러스터
(4) 글로벌 탄소중립 선도도시 도약을 위한 해수이용 친환경 에너지저장 핵심기술개발
(5) 한-미 물-에너지 미래기술 워크샵 (기반구축사업)
(6) 해수이용 CO2-전력 동시저장 융합시스템 구현을 위한 미래원천기술개발
(7) 생체모방기반 이산화탄소 농도차발전 및 활용 핵심원천기술 개발

(1) Hanki Kim (First Author), Electrochemical Analysis of High-Performance Flow-Electrode Capacitive Mixing (F-CapMix) under Different Operating Conditions, ACS sustainable chemistry & Engineering. (2021)
(2) Hanki Kim (First Author), Optimization of the number of cell pairs to design efficient reverse electrodialysis stack, Desalination, (2021)
(3) Hanki Kim (First Author), Nernst-Planck analysis of reverse-electrodialysis with pore-filling membranes and its upscaling potential, Water Research (2020)

● Applications of renewable energy systems integrated with building
● Optimal control method for heating supply system at apartment housing
● Energy analysis and control for building HVAC systems

● Potential cooling savings from a ground-coupled return-air duct system for residential buildings in a hot and humid climate
● Development procedure of an air-source heat pump base-casesimulation model for a code-compliant residential building
● Prediction of cooling energy use in buildings using an enthalpy-based cooling degree days method in a hot and humid climate
● Development and validation of a custom-built ground heat exchanger model for a case-study house
● Energy benefits from semi-transparent BIPV window and daylight-dimming systems for IECC code-compliance residential buildings in hot and humid climates
● Development of a ground-coupled heat pump system simulation model using g-function approximation for a residential code-compliant tool
● Improving a Heating Supply Water Temperature Control for Radiant Floor Heating Systems in Korean High-Rise Residential Buildings
● Heating performance Analysis for Short-Term Energy Monitoring and Prediction Using Multi-Family Residential Energy Consumption Data
● Development of a Predictive Model for a Photovoltaic Module's Surface Temperature

- SOFC/SOEC BOP 시스템 기술
- 스마트 공업로 연소제어기술
- 수중 플라즈마 절단 기술
- Ti 플라즈마 진공 용해로
- 산업용 저열량 가스기기 대응기술
- 300M3/h 수소스테이션 개질기 버너 개발 및 반응로 해석
- Plasma 유리용해로
- SUS BA 고효율 연소기술
- 저압식 LPC 침탄로 개발

- Development and CFD analysis for determining the optimal operating conditions of 250 kg/day hydrogen generation for an on-site hydrogen refueling station (HRS) using steam methane reforming(Int. journal of Hydrogen energy, 2021)

- Analyzing different planar biogas-fueled SOFC stack designs and their
effects on the flow uniformity(Energy, 2020)

- Use of response surface methodology to optimize NOx emissions and efficiency of W-type regenerative radiant tube burner under plasma-assisted combustion(Journal of Clean Production, 2020)

- Design and analysis of compact hotbox for SOFC based 1kW-class power generation system.(Applied Energy, 2017)